Total Pageviews

Thursday 10 July 2014

Landing Bay Terrain

So I have spent a week working away on this project and am now taking a break to work on a set of 40K Knights. It will be an interesting challenge that will involve making use of a suggested way to sculpt icons that I had seen years ago. I guess I will be testing how good my memory is too.

The photos are grouped in three different sections separately, the last showing a  mock up of all parts assembled in the current form of the table.

The Teleport Pad

Rather than awkwardly squeezing this piece into a corner I have made it the central feature of it's section. I am planning on putting two high partial structures on either side of the teleport pad to add some height but I have an idea for another structure that can potentially give a sense of surrounding the pad without significantly impeding movement (specifically vehicle movement) too much.

The lighting channels underneath the pad are now finalized and have been lined with card. I have also added an overhang of card to the portions which will hold the wires in so that it is easier to insert the lights and place the lid on.


The lid portion may have channels cut into three of the lower steps. This would allow more light from the light system to shine through the base rather than just giving a ground effect off of the lowest level.

















The Plane Elevators

There is to be a largish central structure here that will probably extend over an ammo elevator that will be between the two planes.

I have cut out lengths of foamcore to make the appearance of open doors but I have to decide if I want them above or below the lighting system. It is only a thin strip of the door showing.

I have to work out the details of the elevators, specifically the mechanisms underneath and the carriages carrying the planes. I am also considering having different elevators to have the planes at different heights but that seems needlessly complex.














New Layout

By spacing the arches more it is much more player friendly but the whole thing looks too flat. Nevertheless all of this is mostly just the base of the board sections. It will be the details that add depth to the board.
 












Update:

By the way, I would not recommend using the card from cereal boxes, at least not the ones I used. I had decided on it as a material as it was readily available and a by product of breakfast.

However the card stock is too thin and too easily warps from even the small amounts of moisture in the glue. This is part of the reason a lot of heavier card stock was added to the teleport pad (i.e. to smooth out its appearance as well as adding some much needed detail).
 









2 comments:

  1. Mario, the docking bay is looking amazing. Are you thinking Eldar architecture? Imperial? I like the focus of having just the one (seemingly) circular shape smack dab in the middle.
    Love it.
    Peter

    ReplyDelete
  2. It is an imperial launch bay. I have included eagle motifs and have cast a GW terrain piece to have Astartes statues serving as both decoration and weight to the bases of the arches. The overall look is to have a lot of hard edges with a very metallic scheme that matches the drop pod launch bay army tray I made for the Wolves a couple of years ago.

    The teleport pad was inspired by a display base I saw at a GT in Chicago in 2002. the base used a series of geometrical shapes protruding from under a base to make a Mechanicum-like teleport pad. I have added a lot more detail to the base and the structure that rises above the teleport pad but the influence is seen in the shapes that stick out from under the circular portion of the pad. This is all a very long way to say it just looks neat. As I wrote I tried to accommodate that piece into a quarter of the table but it just would not work cleanly, meaning that I thought it would interfere too much with the deployment of an army.

    The last two main structure ideas may include:

    - a large multi-tiered building that will run between the launch rails and extends over the elevator board. The required base to provide stability will have to include an ammo elevator that I want between the two plane elevators. There will be multiple exposed balconies to allow a lot of tactical possibilities in a game...hopefully.

    - an eagle-like structure modelled after the macro-canon Wall of Martyrs terrain set. So a smaller series of arches that will surround the teleport pad with a centralized eagle-like structure standing on the edge of the elevator board facing the teleporter.

    At least that's the plan.

    Thanks for the kind words.

    Mario

    ReplyDelete